Description

Scraper Blades for Bambu Lab Printers — 3 Pack

These compatible scraper blades are a handy, affordable tool for releasing finished prints from your build plate. Each blade is thin and sharp enough to slide under the corner of a print without gouging the plate or damaging the model. The pack includes three blades, so you have spares as one dulls or goes missing.

They’re an aftermarket alternative to the Bambu Lab scraper, designed to work with the printable scraper grip that Bambu Lab printers include in their built-in files.

Why Use a Proper Scraper?

Prying prints off with a screwdriver, a butter knife, or whatever’s nearby scratches and gouges build plate surfaces, and those marks show up on the bottom of your next print. A thin, sharp scraper slides cleanly under the print, so you can release it with minimal force and less risk to the plate. Using the right tool prolongs the life of your build plate.

How to Use

Let the plate cool down first. Gently slide the scraper under one corner of the print, then carefully bend the flexible plate to release the model. Most prints will pop off with the plate flexed. The scraper just gets things started.

Take care with the edge. The blades are sharp. Keep the blade flat and low against the plate rather than digging in at an angle, and keep fingers clear of the cutting edge.

Pair with the Printable Scraper Grip

The blades are supplied without a handle. Bambu Lab printers include a “Scraper grip” model in their built-in files, so you can print your own handle straight from the printer. The grip holds the blade securely and keeps your hand clear of the edge.

Compatibility

For use with flexible build plates on Bambu Lab printers. These are standalone blades used by hand with the printable grip, and they don’t mount to the printer itself.

What’s Included

Scraper blade × 3

The scraper grip handle is not included. Click here for handle designs to print