$5.99
3 in stock
✅ Thicker Resin-Based Formula — Super Strong Bond & Gap Filling
✅ Extra Working Time to Position & Adjust Parts
✅ Dries Clear — No Visible Residue
✅ Pre-Assembly Use — Brush On, Then Join
✅ Fine Pointed Brush Cap for Precise Application
✅ Made in Australia
✅ All Stocked in South Australia
IckySticky Liquid Cement is a thicker, resin-based solvent cement that produces the strongest bond in the IckySticky cement range. Unlike the Extra Thin and Quick Set formulas which are watery and rely on capillary action, Liquid Cement has a viscous consistency with added resin that fills gaps between parts, producing a super strong weld even on joints that don’t fit perfectly.
It dries clear, allows extra working time to reposition parts before the bond sets, and can be built up with additional coats to strengthen a join further. This is the cement to reach for when parts have gaps, when you need the strongest possible bond, or when you want time to get the alignment just right.
Thicker viscosity with added resin — stays where you put it. Gap-filling capability for ill-fitting joints. Extra working time for repositioning. Pre-assembly only — brush on, then join. No capillary action. Strongest bond in the range.
Watery thin formula with excellent capillary action. Wicks along seams by itself. Pre or post-assembly. Best for well-fitting joints on precision kits.
Thin formula with capillary action. Sets in 10–15 seconds. Post-assembly only. Best for fast assembly of well-fitting parts.
Choose Liquid Cement when gaps need filling or when you need maximum bond strength and working time. Choose Extra Thin or Quick Set when parts fit tightly and you want the cement to flow into the seam.
Brush a coat of Liquid Cement onto one mating surface, then press the two parts together. The thicker formula stays on the surface rather than running off, giving you time to align and adjust before the bond sets. If the join needs extra strength, apply more cement along the seam after assembly to reinforce.
This formula has no capillary action — it will not wick along a seam. Apply it directly where you need it.
The cap includes a built-in fine pointed brush for precise application into tight spaces and around small parts. The brush is long enough to reach the bottom of the bottle for consistent application right to the last drop.
Polystyrene (PS) — plastic model kits from Tamiya, Revell, Airfix, Bandai, and others
Styrene sheet and strip — scratchbuilding and kitbashing
ABS plastic — with reduced effectiveness
Does not bond resin, metal, wood, or 3D printed parts (PLA, PETG, etc.). Use super glue (CA adhesive) for those materials.
Volume: 40 ml
Type: Solvent-based liquid cement with resin
Appearance: Opaque liquid, dries clear
Applicator: Fine pointed brush (built into cap)
Bottle base: 42 × 42 mm
Made in Australia
| Weight | .250 kg |
|---|---|
| Dimensions | 10 × 10 × 10 cm |
Reviews
There are no reviews yet