Description

BIQU Panda CryoGrip Pro Build Plate for Bambu Lab H2C

The BIQU Panda CryoGrip Pro is a premium magnetic spring steel build plate that delivers exceptional print adhesion at significantly lower bed temperatures than standard PEI plates — and in many cases, no heated bed at all. It replaces messy glue sticks, hairspray, and adhesion workarounds with a surface that simply works, print after print.

Available in two textures — Frostbite (coarse) and Glacier (fine) — the CryoGrip Pro uses an innovative 7-layer composite construction with a porous polymer top coat that grips filament during printing and releases cleanly with a simple flex of the spring steel once complete.

Frostbite vs Glacier — Which to Choose

Frostbite (Coarse Texture)

Maximum grip strength with a Grip Strength Index (GSI) of 10. The coarse texture provides the strongest adhesion available, ideal for large PLA and PETG prints prone to warping or lifting. Prints PLA at room temperature (30–50°C bed) and PETG at reduced bed temps (50–70°C). Compatible with PLA and PETG only.

Clean with soap and water only. Do not use isopropyl alcohol on the Frostbite surface.

Glacier (Fine Texture)

Smoother surface with a GSI of 8 and broader material compatibility. Handles PLA and PETG at lower temperatures like Frostbite, plus supports ABS, ASA, PA (nylon), PA-CF, and other engineering filaments. Produces a smooth matte bottom finish on prints. The Glacier is the recommended choice for H2C owners who print across a range of materials including engineering filaments in the enclosed chamber.

Clean with soap and water, or isopropyl alcohol if needed.

7-Layer Composite Construction

The CryoGrip Pro is built with a precision-engineered 7-layer structure — high-hardness 580HV ferromagnetic spring steel base, dual base coats with ultra-strong bonding agents, dual corrosion and shock-resistant intermediate layers, and dual porous polymer top coats. This construction prevents delamination even after hundreds of flex cycles.

No Glue, Lower Temperatures

The CryoGrip Pro surface eliminates the need for glue sticks, hairspray, or adhesion sheets. For PLA, the Frostbite plate holds prints firmly at bed temperatures as low as 30°C — or even at room temperature. This reduces energy consumption, speeds up start-to-print times, and eliminates cool-down waits for part removal.

Flex Release

Once the print is complete, let the plate cool briefly (or immediately for cold-printed PLA), then flex the spring steel and the part pops off cleanly. No scraping, no tools, no damage.

Compatibility

This listing is sized specifically for the Bambu Lab H2C build platform. The H2C has a different bed size to the H2D and H2S — ensure you select the correct plate for your printer model.

For other Bambu Lab printers, see our CryoGrip Pro listings for H2S/H2D, X1/P1/A1, and more.

Care & Maintenance

Frostbite — soap and water only, no alcohol. Glacier — soap and water, or isopropyl alcohol if needed. Do not use acetone on either surface.