BIQU Panda Diaper Waste Pads for Bambu Lab X1/P1

Description

Stop Debris From Getting Inside Your Printer

The BIQU Panda Diaper is a reusable silicone waste pad that sits under the build plate of your Bambu Lab X1 or P1 series printer and catches everything that falls — filament purge waste, support material scraps, dust, and the small bits of debris that accumulate during multi-colour and multi-material prints. Instead of tiny filament pieces dropping into gaps and crevices where they’re impossible to reach, they land on the pad. When it’s time to clean, lift it out, tip it into the bin, and put it back.

If you run AMS multi-colour prints regularly, you know how much purge waste builds up. The Panda Diaper turns a tedious cleanup job into a 10-second task.

Full Coverage, Precision Fit

The Panda Diaper is precision-molded using the original printer base dimensions to ensure complete coverage across the bottom of the X1 and P1 chassis. It covers the gaps between the build plate and the printer frame where debris typically falls and accumulates — the areas that are hardest to reach during manual cleaning and where buildup can eventually affect printer mechanics or cause print errors.

The raised edges act as a lip that keeps everything contained, preventing waste from sliding off the sides or into the chassis.

Anti-Static Silicone

The pad surface is treated with an anti-static coating that prevents it from attracting every speck of dust in your workshop. Standard silicone tends to collect static charge and become a dust magnet — the anti-static treatment on the Panda Diaper means it catches what falls on it without pulling in additional airborne particles.

Reusable & Easy to Clean

Made from premium flexible silicone, the Panda Diaper is designed for long-term reuse. When it needs cleaning, simply wipe it down, rinse it under water, or peel off accumulated waste. It’s a sustainable, cost-effective alternative to disposable liners or paper towels, and it won’t degrade or lose its shape after repeated cleaning cycles.

Compatibility

This version of the Panda Diaper is designed for:

Bambu Lab X1 Carbon (X1C)
Bambu Lab X1E
Bambu Lab P1P
Bambu Lab P1S

The pad fits the base dimensions of these printers without interfering with moving parts or the build plate mechanism.

Installation

Place the Panda Diaper onto the printer base beneath the build plate area. It sits in position without adhesive — the precision fit and silicone grip keep it in place during printing. To clean, lift it out by the edges, empty the collected debris, wipe or rinse, and replace.