$24.99
✅ EndCoat™ Patented Coating — HV3300 Hardness
✅ 2.5× Longer Service Life Than Standard Hardened Steel
✅ Quick-Swap — Tool-Free Nozzle Change
✅ Fits K1C, K1 Max, K1 SE, Ender-3 V3 & Ender-3 V3 Plus
✅ Available in 0.4mm & 0.6mm
✅ All Stocked in South Australia
The Phaetus EndCoat™ nozzle for the Creality K1C platform combines a hardened steel body with Phaetus’s patented EndCoat™ coating — achieving HV3300 surface hardness and extending service life up to 2.5 times longer than standard hardened steel. It’s the mid-range upgrade between the stock bimetallic nozzle and the premium silicon carbide option, delivering significantly better wear resistance at a more accessible price.
If you print abrasive filaments regularly but don’t need the 7× lifespan of silicon carbide, the EndCoat™ nozzle is the sweet spot of performance and value.
The stock K1C bimetallic nozzle uses a copper body with a hardened steel tip — effective, but the steel tip still wears over time with abrasive filaments. EndCoat™ adds a proprietary coating to the critical wear surfaces that increases hardness to HV3300, dramatically slowing bore wear and maintaining a precise orifice diameter over much longer use.
The coating also provides low-friction properties, reducing filament adhesion inside the bore for smoother flow and less internal buildup.
The standard all-rounder. Best balance of detail and speed for everyday printing across all materials including carbon fibre and glass fibre composites.
Higher throughput for fast functional prints. Recommended for abrasive CF and GF filaments where the wider bore reduces clogging risk while maintaining good detail.
Copper body + hardened steel tip. Baseline performance. Wears noticeably with heavy CF/GF use. Lowest cost.
Hardened steel + HV3300 EndCoat™ coating. 2.5× longer life. Mid-range price. The practical upgrade for regular abrasive filament users.
SiC (Mohs 9.8) + EndCoat™. 7× longer life. Highest price. For heavy daily abrasive filament use where maximum lifespan justifies the premium.
Compatible with the K1C’s tool-free quick-swap nozzle system. Heat the nozzle, release the mechanism, swap, and lock. Under a minute, no tools required.
Creality K1C
Creality K1 Max (2024 version with quick-swap hotend)
Creality K1 SE
Creality Ender-3 V3
Creality Ender-3 V3 Plus
Not compatible with the original K1 (2023 without quick-swap), K2 series, or older Ender 3 models.
Material: Hardened steel with EndCoat™ patented coating
Coating hardness: HV3300
Service life: up to 2.5× standard hardened steel
Available sizes: 0.4 mm, 0.6 mm
Filament diameter: 1.75 mm
Quick-swap: Yes — tool-free
| Weight | .1 kg |
|---|---|
| Dimensions | 10 × 10 × 5 cm |
| Variant | 0.4mm, 0.6mm |
Reviews
There are no reviews yet