Description

BIQU Panda Juicer HFC High Flow Hardened Steel Hotend for Bambu Lab P2S / X2D

The Panda Juicer HFC is BIQU’s high-flow, nano-coated hotend engineered as a complete replacement for Bambu Lab P2S and X2D printers. It combines an integrated one-piece metal design with a nano-coated hardened steel nozzle, solving two problems at once — the leak-prone joints found in multi-part hotends, and the rapid nozzle wear that comes with printing carbon fibre and glass fibre filaments.

Integrated Nozzle + Heat Break — Zero-Leak Design

Rather than a nozzle threaded into a separate heat break, the HFC’s nozzle and heat break are precision-machined from a single piece of metal. This eliminates the gap where plastic can leak and ooze during printing, creating a perfect, permanent seal that standard multi-part hotends can’t match.

Nano-Coated Hardened Steel — 9.8 Mohs Hardness

The nozzle achieves a hardness rating of 9.8 on the Mohs scale thanks to its nano-coating over hardened steel — delivering more than double the service life of standard hardened steel nozzles, virtually zero wear from PLA, and minimal residue buildup even with heavily filled, abrasive materials like carbon fibre and glass fibre composites.

High Flow Core — Faster Printing

The HFC’s optimised high-flow internal design increases maximum volumetric speed by roughly 20% over stock, letting you push print speed further before hitting the under-extrusion ceiling that limits standard nozzles. Real-world users report noticeably cleaner prints and reduced clogging risk alongside the speed gains.

Available Sizes

0.4mm

The standard all-rounder — the size where the high-flow design makes the biggest practical difference for everyday fast printing across all materials, including carbon fibre and glass fibre composites.

0.6mm

Higher throughput for faster functional prints, with reduced clogging risk on heavily filled abrasive filaments.

0.8mm

Maximum flow for large parts, vase-mode, and draft prints where speed matters more than fine detail.

Direct Drop-In — No Modifications Needed

Engineered for seamless, plug-and-play installation on the P2S and X2D — no printed modifications and no firmware changes required. It’s a direct replacement for the stock hotend, not a workaround requiring extra parts or settings tweaks.

HFC vs Standard Panda Juicer Variants

BIQU’s Panda Juicer range includes multiple tiers — standard flow (SF), high flow (HF), and the HFC (High Flow, Coated) featured here, which pairs the high-flow core with the nano-coated nozzle for the combined benefit of speed and extended wear resistance. If you print abrasive filaments regularly and want both faster printing and the longest possible nozzle life in one part, HFC is the top-tier choice in the range.

Compatibility

Bambu Lab P2S
Bambu Lab X2D

Note: BIQU also offers versions of this hotend specific to the A1, A1 Mini, and H2D — check you’re ordering the correct variant for your printer, as the P2S/X2D and A1/H2D versions use different fitments.

Supported Materials

PLA, ABS, PETG, TPU, and abrasive industrial composites including carbon fibre and glass fibre reinforced filaments.

Specifications

Series: HFC (High Flow, Coated)
Design: Integrated one-piece nozzle + heat break (precision-machined)
Nozzle material: Nano-coated hardened steel
Hardness: 9.8 Mohs
Flow: High flow — approximately 20% higher max volumetric speed vs stock
Available sizes: 0.4mm, 0.6mm, 0.8mm
Filament diameter: 1.75mm
Compatibility: Bambu Lab P2S, X2D