Black Friday Flash Sale — Basic Matte PLA now $14.99, was $17.99 · Limited time while stocks lastBasic Matte PLA now $14.99, was $17.99
Shop Now
Filament bundle deal — 6+ rolls get 6% off · 10+ rolls get 10% off · Mix and match any brand or colour 6+ rolls get 6% off · 10+ rolls get 10% off
Excl Apply

Prusa Nozzle Brass – 0.25 / 0.4 / 0.6 mm (Nextruder)

$49.99

✅ Original Prusa All-Metal Nozzle with Built-In Heatbreak for the Nextruder
✅ Brass — Great Heat Transfer for PLA, PETG, ASA & Everyday Filaments
✅ No PTFE Anywhere in the Filament Path — All-Metal Guide
✅ Quick Nozzle Changes — Swap Sizes in Minutes
✅ Available in 0.25mm, 0.4mm & 0.6mm
✅ Fits MK4/S, MK3.9/S, CORE One/+, CORE One L/+ & XL/+
✅ All Stocked in South Australia

Description

Prusa Nozzle Brass — 0.25 / 0.4 / 0.6 mm for the Nextruder

This is the original Prusa brass nozzle for printers fitted with the Nextruder. It combines the nozzle and the heatbreak into a single all-metal, high-precision part, so the whole filament path through the Nextruder is metal, with no PTFE tubes anywhere. That improves reliability and makes changing nozzles much faster, which is handy for swapping between fine detail and quicker, thicker prints.

Brass is the standard nozzle material for everyday printing. It transfers heat well and suits PLA, PETG, ASA, and most common filaments.

All-Metal Filament Guide

On the newer generation of Prusa printers, the nozzle includes an all-metal filament guide. The filament runs through metal the whole way, with no PTFE liner anywhere in the Nextruder. That removes a common wear and failure point and keeps the path consistent from the extruder gears to the melt zone.

Quick Nozzle Changes

Because the heatbreak is part of the nozzle, changing a nozzle is quick. That makes it easy to keep a few sizes on hand and swap as the job changes.

Choosing a Size

0.25mm

For very fine detail. Think miniatures, small text, and delicate features. Prints take longer, so it’s best for small, high-detail models. Use clean, dry filament, since a narrow nozzle clogs more easily.

0.4mm

The standard all-rounder and the nozzle the printer ships with. A good balance of detail, strength, and speed for most prints.

0.6mm

Faster prints and stronger parts. A good choice for big functional prints, thicker layers, and when you want to save time and fine detail isn’t critical.

Brass Isn’t for Abrasive Filaments

Brass wears quickly with carbon fibre, glass fibre, glow-in-the-dark, and other filled filaments, and a worn nozzle loses accuracy. For abrasive materials, choose a hardened nozzle instead.

Using V6-Style Nozzles

If you prefer V6-compatible nozzles, Prusa offers a Nextruder-to-V6 adapter. Check it’s compatible with your printer before ordering.

Installation

Refer to Prusa’s assembly guide for replacing the nozzle on your printer model for the full step-by-step procedure. Let the hotend cool completely before handling anything.

Never touch the nozzle or heater block while hot.

Compatibility

Original Prusa MK4 and MK4S
Original Prusa MK3.9 and MK3.9S
Original Prusa CORE One and CORE One+
Original Prusa CORE One+ (Gen 2)
Original Prusa CORE One L and CORE One L+
Original Prusa XL and XL+

Not compatible with the MK3, MK3S, MK3S+, MK3.5, MK3.5S, MK2.5, MK2, MINI and MINI+, HT90, or INDX, which use different nozzles.

Additional information

Weight 0.1 kg
Dimensions 10 × 10 × 5 cm
Nozzle size

0.25 mm, 0.4 mm, 0.6 mm

Reviews

There are no reviews yet

Be the first to review “Prusa Nozzle Brass – 0.25 / 0.4 / 0.6 mm (Nextruder)”

Your email address will not be published. Required fields are marked *