Description
Prusa Nozzle Brass — 0.25 / 0.4 / 0.6 mm for the Nextruder
This is the original Prusa brass nozzle for printers fitted with the Nextruder. It combines the nozzle and the heatbreak into a single all-metal, high-precision part, so the whole filament path through the Nextruder is metal, with no PTFE tubes anywhere. That improves reliability and makes changing nozzles much faster, which is handy for swapping between fine detail and quicker, thicker prints.
Brass is the standard nozzle material for everyday printing. It transfers heat well and suits PLA, PETG, ASA, and most common filaments.
All-Metal Filament Guide
On the newer generation of Prusa printers, the nozzle includes an all-metal filament guide. The filament runs through metal the whole way, with no PTFE liner anywhere in the Nextruder. That removes a common wear and failure point and keeps the path consistent from the extruder gears to the melt zone.
Quick Nozzle Changes
Because the heatbreak is part of the nozzle, changing a nozzle is quick. That makes it easy to keep a few sizes on hand and swap as the job changes.
Choosing a Size
0.25mm
For very fine detail. Think miniatures, small text, and delicate features. Prints take longer, so it’s best for small, high-detail models. Use clean, dry filament, since a narrow nozzle clogs more easily.
0.4mm
The standard all-rounder and the nozzle the printer ships with. A good balance of detail, strength, and speed for most prints.
0.6mm
Faster prints and stronger parts. A good choice for big functional prints, thicker layers, and when you want to save time and fine detail isn’t critical.
Brass Isn’t for Abrasive Filaments
Brass wears quickly with carbon fibre, glass fibre, glow-in-the-dark, and other filled filaments, and a worn nozzle loses accuracy. For abrasive materials, choose a hardened nozzle instead.
Using V6-Style Nozzles
If you prefer V6-compatible nozzles, Prusa offers a Nextruder-to-V6 adapter. Check it’s compatible with your printer before ordering.
Installation
Refer to Prusa’s assembly guide for replacing the nozzle on your printer model for the full step-by-step procedure. Let the hotend cool completely before handling anything.
Never touch the nozzle or heater block while hot.
Compatibility
Original Prusa MK4 and MK4S
Original Prusa MK3.9 and MK3.9S
Original Prusa CORE One and CORE One+
Original Prusa CORE One+ (Gen 2)
Original Prusa CORE One L and CORE One L+
Original Prusa XL and XL+
Not compatible with the MK3, MK3S, MK3S+, MK3.5, MK3.5S, MK2.5, MK2, MINI and MINI+, HT90, or INDX, which use different nozzles.





Reviews
There are no reviews yet